Precision CNC Machining for Luxury & Cosmetics
Mirror-polished perfume caps, leather goods closures, watch components and fine jewellery parts — machined to optical-quality surface finish with 100% visual inspection and zero-defect commitment.
Surface finish
Ra < 0.05 µm
Quality target
0 PPM defects
Materials
Brass · Al · SS
Luxury CNC Parts by Category
Swiss-type sliding-head lathes and multi-axis machining centres allow us to produce complex luxury components with aesthetic surfaces and tight tolerances in the same operation.
Leather Goods & Accessories
- Bag closures and clasps in brass/aluminium
- Decorative hinges and pivots
- Zip pullers and D-rings
- Metal button inserts
Perfumery & Cosmetics
- Perfume bottle caps in aluminium
- Lipstick tubes and mechanisms
- Compact mirror frames
- Pump and valve components
Fine Jewellery & Watches
- Watch case and crown components
- Ring shanks and settings
- Bracelet links and clasps
- Micro-mechanical parts Ø 0.5–5 mm
Writing Instruments
- Pen barrel inserts in brass
- Pen clips and ring trim
- Cap liners and fittings
- Precision hinges
Surface Finishes for Luxury Parts
Every visible surface is engineered, not just machined. Ra is measured systematically on a calibrated profilometer and reported with each delivery.
Mirror Polish
Ra < 0.05 µm — diamond turning and optical polishing. For perfume caps, luxury closures, visible decorative surfaces.
Satin / Brushed
Grain 180 / 240 / 320 — uniform directional brushed texture for luxury goods.
Electropolishing
Ra < 0.1 µm — electrochemical material removal for curves and hidden geometry.
Anodising (ready)
Parts machined to exact specification to receive anodising post-machining.
PVD Coating (ready)
Dimensional finishing for subsequent PVD coating (gold, black, gunmetal).
Three-Level Quality Control
Luxury brands accept zero compromise. Our quality system for luxury parts operates at three levels — from process qualification to the individual inspection of every single part before shipment.
Process qualification
First article on 5 samples: Ra measurement with calibrated profilometer, full dimensional CMM report, visual assessment on a dedicated light panel with defined acceptance criteria.
In-process statistical control
SPC on all critical dimensions throughout the production run. Automatic in-process gauging. Any drift triggers an immediate stop and corrective action before non-conforming parts are produced.
100% final visual inspection
Every part individually inspected on a dedicated station under calibrated lighting. Acceptance criteria: zero visible scratches, marks or burrs on surfaces. Each accepted part individually wrapped.
Ra < 0.05 µm
Mirror finish
0 PPM
Target defect rate
100%
Visual inspection
Luxury CNC Machining — Frequently Asked Questions
Luxury CNC Machining — NDA on Request
Mirror finish Ra < 0.05 µm, 100% visual inspection, zero-defect commitment. Brass, aluminium, precious alloys. Quote within 48 business hours.